Home/Support/Support Forum/Driver access to User LEDs: LE49 and LE51 ??
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Driver access to User LEDs: LE49 and LE51 ??

0 votes
Attempting to port a driver to this platform for a customer of Digi i.e. I work for a 3rd party.
Can anyone tell me to which physical addresses the two User LEDs respond? Would like to use them to debug our driver. Even better if you could provide snippet of code that controls the LED(s).
(At the moment does not appear that our SDIO card is recognized - have verified that registry entries are correct).

Highly appreciative,
asked Aug 2, 2011 in Windows CE by gerlad0 New to the Community (4 points)
recategorized Dec 3, 2013 by tuxembb

Please log in or register to answer this question.

2 Answers

0 votes
Hello Gerald,

I guess you are in WCE platform. is it ?
You have sample application in Linux & WINCE as well.
Try that it will help in accessing user LEDs.

LEDs are GPIO 73 -> GPIO3_9 & 74 -> GPIO3_10.
In code i guess you can access it as GPIO 73 & GPIO 74.
This must be mentioned in sample code coming with WINCE bsp.. I found it in linux ESP.

Refer Page 66 of http://ftp1.digi.com/support/documentation/90001128_C_EA.pdf
answered Aug 2, 2011 by bobthomas13 Seasoned Professional (182 points)
0 votes
Thanks Bob for the pointer to the H/W reference manual.

Unfortunately, I don't have access to the CE7 BSP.
That should help me determine if our miniport gets loaded. Odd that I see 'Card is Present' from the serial Console port but no indication that an attempt is ever made to load our driver. Wonder if CE7 imposes more constraints on miniports than CE6?
answered Aug 2, 2011 by gerlad0 New to the Community (4 points)