Default password Anywhereusb/14?

Question

Hello

What's the default password for browsing the AnywhereUSB/14 in webbrowser? Can't find it!

/Christopher

Answer 1

The default username is root and the default password is dbps. However users can change the password if needed. If you do not know the username or password, you may need to factory default the unit. Verify you know the ip address the AnywhereUSB device was set for then proceed with the factory default process.

Using the Front Panel Reset Button
If the AnywhereUSB cannot be accessed from the Web interface, the
configuration can be restored to factory defaults using the Reset button.
1. Power off the AnywhereUSB by unplugging the power.
2. Press the Reset button on the front of the unit.
3. While holding the Reset button, power up the unit.
4. Hold the Reset button for 20 seconds and then release it

Comments

products manufactured since 2020 will have a unique default password which is printed on its label, see: https://www.digi.com/support/knowledge-base/unique-default-passwords-for-digi-products

Answer 2

By default AUSB will not have any Username or password.... If you have set one and forgot the Username and password then you have reset the device to factory default using hard reset method I.e. using front reset button.

Answer 3

what is the default IP of the device?

Answer 4

The AnywhereUSB products are set to DCHP by default.
The AnywhereUSB config utility will show the ip address assigned by the Dhcp server. From the AnywhereUSB config utility, right click the specific AnywhereUSB device you are working on and left click Web UI. Then you should be able to change the AnywhereUSB device to s static ip address.