Home/Support/Support Forum/Support on Solaris SPARC LDOM 10 or 11 ?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Support on Solaris SPARC LDOM 10 or 11 ?

0 votes
Hi,
After having fights with installing in Zone,I would like to know if is supported and will work to run realport in an LDOM 10 or 11 on SPARC architecture.

Much appreciated.

Thanks,

Regards.
asked Sep 2, 2013 in Realport by Andres New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Install the driver in the global zone.

Create a new zone by following the procedure here:

http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html

After doing the command:

# zoneadm -z my-zone install

Which creates the whole file system structure, we can modify that Zone's file system by just going into it from the Global Zone:

# cd /export/home/my-zone/dev

Now, we just need to create the node inside there.

In the global zone:

# ls -l /dev/dty/a001s
crw-rw-rw- 1 root other 203, 1 Aug 4 19:24 /dev/dty/a001s

Did the following:

# mkdir /export/home/my-zone/dev/dty
# chmod 777 /export/home/my-zone/dev/dty
# mknod /export/home/my-zone/dev/dty/a001s c 203 1

Verify that its the same:

# ls -l /export/home/my-zone/dev/dty/a001s
crw-r--r-- 1 root root 203, 1 Aug 4 20:08
/export/home/my-zone/dev/dty/a001s

Now reboot the my-zone zone:

# zoneadm -z my-zone reboot

Log back into that zone:

# zlogin my-zone
[Connected to zone 'my-zone' pts/4]
Last login: Fri Aug 4 21:02:18 on pts/4
Sun Microsystems Inc. SunOS 5.10 Generic January 2005

Verify the device is still there:

bash-3.00# ls -l /dev/dty/a001s
crw-r--r-- 1 root root 203, 1 Aug 4 21:08 /dev/dty/a001s

Verify that the tty works:

bash-3.00# stty -a </dev/dty/a001s | grep speed
speed 9600 baud;

All done! =)
answered Dec 10, 2013 by userid0 Veteran of the Digi Community (2,158 points)
...