Home/Support/Support Forum/Configure ospf on transport wr21
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Configure ospf on transport wr21

0 votes
I´ve done a simple ospf conf between wr21 and cisco router
using Area 0 over the ppp1. but the wr21 are sending stub/transit are option bit out to Cisco router on Area0...
...and the router-id is 0.0.0.0

WR21 ospf.conf looks like this:

# Global config
redistribute connected
router-id 192.168.1.1
#areas
area 0 {
interface ppp1
interface eth0
}
}

******************************
log from cisco router:
mismatched Stub/Transit area option bit
******************************
...how do I configure the ospf net between the devices so the will agree on the ospf options, or configure wr21 to use Area 0 whitout optionbit set?!
asked Oct 21, 2013 in Digi TransPort by Tonna New to the Community (0 points)
edited Oct 21, 2013 by Tonna

Please log in or register to answer this question.

...