Hello,
I have som "bricked" devices that i want to recover.
I try to follow the procedure as described in:
Digi_MM_Recover
This is the log from TFTPD_32:
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:21:7E:90:00:63 [20/11 09:07:56.346]
Client requested address 0.0.0.0 [20/11 09:07:56.356]
DHCP: proposed address 192.168.100.2 [20/11 09:08:00.976]
5212 Request 2 not processed [20/11 09:08:00.976]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:21:7E:90:00:63 [20/11 09:08:04.326]
Client requested address 0.0.0.0 [20/11 09:08:04.326]
DHCP: proposed address 192.168.100.2 [20/11 09:08:08.946]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:21:7E:90:00:63 [20/11 09:08:08.946]
Client requested address 0.0.0.0 [20/11 09:08:08.956]
DHCP: proposed address 192.168.100.2 [20/11 09:08:13.576]
5212 Request 2 not processed [20/11 09:08:13.576]
5212 Request 2 not processed [20/11 09:08:13.576]
From wireShark i can see that Digi module asks for firmware upload (BOOTP)but, aparentelly Digi module wants the IP address 0.0.0.0 and don't accept the sugested IP assigned by TFTP server.
From the serial port I got:
Starting TFTP recovery...
Starting serial recovery...
CCCCCC
I belive that bootloader is ok since i'm able to recover devices using Serial port method (It takes too much time, i'd like to avoid using it)
Thanks in advance,
Márcio