Home/Support/Support Forum/AnywhereUSB/14 crashed after configuring RealPort to modem over serial interface attached.
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

AnywhereUSB/14 crashed after configuring RealPort to modem over serial interface attached.

0 votes
We have tried to use the local serial port with modem attached using RealPort driver directly to VMware. Looks like its working fine but after a while (modem extensively dialing remote destinations) AnywhereUSB stops responding :/ (red status light come up and change to amber after a while - this is repeating until we remove power thus restarting HW appliance)

Question is if there are any special configuration steps necessary using modem over RealPort driver. I see there are many settings which we left to default.

Thanks.
Marcel
asked Jan 14, 2014 in USB Serial by celoox New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
I would ensure you are using the latest AnywhereUSB/14 firmware, version 1.51

http://ftp1.digi.com/support/firmware/82002081_H.dwn


Ensure you are using the latest RealPort 4.5.372 and the AnywhereUSB 3.51 driver.
answered Jan 15, 2014 by halovapor Veteran of the Digi Community (918 points)
...