Home/Support/Support Forum/Connect a port Digiport emulated on a PC with a port emulated on the same Digiport on a server.
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Connect a port Digiport emulated on a PC with a port emulated on the same Digiport on a server.

0 votes
Is possible or not ?
I want connect with a RJ45 cable for example the port number 8 with the port number 4.
My PC send information on the port 8 emulated and the server receipt on the port 4 and I make a bridge between the port number 4 and the port number 8 directly on digiport.
Thanks for your answer.
Best regards
asked Jul 11, 2014 in Portserver TS by matthieu44 New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Sounds like you want a serial bridge between the two ports. The following video outlines this configuration, where you will simply configure the ports on the same unit:

http://www.digi.com/learningcenter/video/player?id=configuring-a-serial-bridge-using-portserver-or-digi-one-products

From the Command line:

#> set port ra=4 auto=on dest=(IP_of_portserver) dport=2108 dev=term

#> set port ra=8 dev=prn

A reboot should be done for the change to take effect:

#> boot action=reset
answered Jul 15, 2014 by userid0 Veteran of the Digi Community (2,158 points)
...