Home/Support/Support Forum/WCE and i.MX53, install WCE on a new module
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

WCE and i.MX53, install WCE on a new module

0 votes
What is the procedure to install WCE on brand new i.MX53 modules?

I have the the "ConnectCore for i.MX53 JumpStart Kit for Microsoft Windows Embedded Compact 7" where I have access to the serial terminal and the SD card.
asked Aug 28, 2014 in Windows CE by handersen New to the Community (6 points)

Please log in or register to answer this question.

1 Answer

+1 vote
 
Best answer
Refer http://www.digi.com/support/productdetail?pid=5425

Dowload Windows Compact 7 from http://ftp1.digi.com/support/developmentsoftware/40002748_F.iso and install it using the KEY that you have in your KIT.

Then follow the docs of creating a platform project and building images.

Once images are build put it in TFTP server

Connect serial port of module in 115200 baud to a terminal program and turn on module.

Interrupt normal uboot boot.

Execute flpart command to see whether partition is defined for windows compact 7 already, if not use flpart itself to repartition.

use update wce tftp command to update wce image.

make sure you have ipaddr, serverip and gatewayip set
#setenv ipaddr 10.x.x.x
#saveenv

also disable dhcp on uboot.
#setenv dhcp off
#saveenv

Now execute update wce tftp , this should take image from tftp and flash onto module

Now dboot wce flash
answered Aug 28, 2014 by tuxembb Veteran of the Digi Community (288 points)
selected Aug 28, 2014 by handersen
...