Home/Support/Support Forum/Help with tutorial please

Help with tutorial please

0 votes
Hi,
I am trying to follow a tutorial on Youtube:
https://www.youtube.com/watch?v=rnBx2yqKn_E

However I have 2 x xbee X24-B radios and the configuration screens have different names ie,
Zigbee Router AT and my interface only has Zigbee Router /End Device AT, also he has a sampling rate to set and I cannot see one, and he has network verification set but I cannot find that, please any info would be most grateful, thanks in advance

Acestu
asked Oct 8, 2014 in Miscellaneous Hardware and Software by acestu New to the Community (8 points)

Please log in or register to answer this question.

4 Answers

0 votes
Do you mean the product family is XB24-B? In the video the product family is XB24-ZB.

What is your product family, function set, and firmware version?
answered Oct 8, 2014 by trooper2 Veteran of the Digi Community (589 points)
0 votes
Hi Trooper,

My radios are xbee series 2 XB24-BWIT-004 rev E

thanks
Acestu
answered Oct 8, 2014 by acestu New to the Community (8 points)
0 votes
You have XB24-B and the guy in the YouTube video is using XB24-ZB. These are different product families with different firmware.

Your XBee has the Znet 2.5 firmware and his has the ZB firmware. They cannot talk to each other.

You can convert Znet 2.5 to ZB if you want. See:

http://www.digi.com/support/kbase/kbaseresultdetl?id=3025
answered Oct 8, 2014 by trooper2 Veteran of the Digi Community (589 points)
0 votes
Hi Trooper,

thanks for the info your a star....

Can you give thanks on this forum ?

If so can you let me know how I do it....

Thanks again
Stuart
answered Oct 8, 2014 by acestu New to the Community (8 points)
...