Home/Support/Support Forum/Xbee S2 and Xbee Pro device battery supply configuration

Xbee S2 and Xbee Pro device battery supply configuration

0 votes
Thanks for the reply,
I am working on Handheld device for measuring and logging data in which we have logging interval. interval settable form 1 min to 255 min, in such situation won't be able to use solar power solution i need my project to be run on batteries. which should last for at least 6 month in case of Xbee s2 series module. should i use regulator for input voltage from battery and outbut of 2.8Vdc will it work for me to the end of battery capacity?
asked Jan 8, 2015 in Multipoint Proprietary by sanjaysutar New to the Community (0 points)
Hi Sanjaysutar,
I am also working on project for lawn maintainance. I also need to run the Xbee S2 for about 6 months. Would you please guide me to achieve the same. How is your approach. Please give some inputs.

Thanks

Please log in or register to answer this question.

1 Answer

0 votes
I would use a voltage regulator as fresh batteries can exceed the radios VCC limits.
answered Jan 14, 2015 by mvut Veteran of the Digi Community (11,300 points)
...