PortServer TS 2 seems to slow down host computer

Question

PortServer TS 2 seems to slow down host computer (output computer) to the point it can not be used. We have the server reading the serial output off a windows computer serial port, then sending it over the network to a different PC using real port software. This happens a few days after it has been working and the port server has been left plugged in. We just defaulted the unit and ran updates, and we still have the same issue, and we are using real port on the other end it, that server is fine the computer getting the serial data. This happen with two different host computers sending data, We are not using a modem, just a serial out put at 8n1 9600 no flow control.

Answer 1

Are you saying that the computer with the RealPort driver is slowing down, or the other computer is slowing down?

Comments

The slow down is on the sending computer connected to the serial Port server.  The virtual Realport on far end is working fine, without any trouble.

---

This does not sound like a "Digi issue" per se, because it's happening on the other computer without the Digi RealPort driver, but I can offer general advice.  Check Task Manager to see if any processes have an unusually high CPU % and/or memory consumption.  My best guess at this point is that you could be dealing with software that has a memory leak bug.