Home/Support/Support Forum/Digi embedded yocto 1.6: how do I add fw_printenv/fw_setenv
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Digi embedded yocto 1.6: how do I add fw_printenv/fw_setenv

0 votes
I am building an image for a connectcard imx28 board.
I need fw_printenv to access uboot environment variables.

I tried adding u-boot-dey-fw-utils and
got Nothing RPROVIDES 'u-boot-dey-fw-utils'

I tried adding u-boot-fw-utils and get ' No rule to make target `ccardimx28js_config'.

Ideas?
asked Apr 9, 2015 in Linux by cobrien New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

+1 vote
u-boot-dey-fw-utils is not available for ccardimx28js, as this platform uses a more complex NVRAM partition with all the u-boot environment plust some more data (partition table, MAC addresses, etc)

But there is an in-house developed tool ubootenv, that serves the same purpose:
Code:
Usage: ubootenv [options] Prints or updates the U-Boot environment -d, --dump Prints the values of all the environment -p, --print 'var_name_list' Prints the value of the list of variables The list has to be simple quoted ('') -s, --set 'var_name=var_value' Sets var_value in the variable var_name The string has to be simple quoted ('') to allow spaces -e --erase 'var_name_list' Removes the list of variables (simple quoted) -c --clean Removes all variables -a --fileadd file_name Adds variables from file_name. To init the full environment from file use -c -a simultaneously -h --help Displays usage information

This command allows to write and read the u-boot environment from Linux.
answered Apr 10, 2015 by jviguera Community Contributor (108 points)
edited Apr 10, 2015 by jviguera
...