Home/Support/Support Forum/What should we do to improve Xbee PRO 900HP outdoor range?

What should we do to improve Xbee PRO 900HP outdoor range?

0 votes
We bought recently two Xbee-PRO 900HP (9B-DMST-002) as we need to implement a Mesh network around a big park. The datasheet of this device indicates that it can transfer data up to 6.5km with a 2.1 dipole antenna. However, after two different tests, we could transfer data between the modules when its distance was lower at least 400m, so there may be something wrong.
During tests, the configurations of both devices where:
1. Power Supply: 3.3V – 2A
2. Antenna: 2.1dB
3. PL: 4 – Max
4. RF Data Rate: 200Kbps
5. Baud rate: 9600
6. Mode: API
7. Environment: No obstacles.
8. Antennas high: 3m from floor.
9. Pins connected: 1, 2, 3 and 10.
Is there anything that we are not considering? How do you measure the maximum distance?
Thanks for your help :)
asked Aug 11, 2015 in XLR PRO by mfabbro New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

0 votes
 
Best answer
At the current antenna height you have, you are not going to get very far. In order to go farther, you have to increase the height of your antennas.

See http://knowledge.digi.com/articles/Knowledge_Base_Article/Maximizing-range/?q=maximizing+range&l=en_US&fs=Search&pn=1 for a better understanding of what I am referring to.
answered Aug 11, 2015 by mvut Veteran of the Digi Community (11,300 points)
selected Aug 12, 2015 by mfabbro
...