Home/Support/Support Forum/XBee Pro 868 and GPS UART communication

XBee Pro 868 and GPS UART communication

0 votes
Hello,

I need to connect an XBee Pro 868 with a GPS module,

Can I connect via UART? Then, from a remote XBee, connected to this and get the values of the GPS.

This is the GPS module datasheet:

http://www.infineon.com/dgdl/bgm1032n7_final_30.pdf?folderId=db3a30431f848401011fcbf2ab4c04c4&fileId=db3a30433072cd8f013073f4f2210025


Best regards
asked Aug 29, 2015 in Multipoint Proprietary by gpio New to the Community (22 points)
edited Aug 29, 2015 by gpio

Please log in or register to answer this question.

1 Answer

0 votes
That GPS front end module is not a GPS module. It is a pre-filter and low noise amplifier (LNA). It is only RF related and has nothing to do with GPS connectivity.

Have a read of this here:
http://examples.digi.com/internet/gps-to-device-cloud/

It is essentially the same but as what you are trying to achieve but is not 868.

Please note the 868 Pro module has been end of lifed. Any new designs should be done using the 868LP or XBee 2.4 range.
answered Aug 30, 2015 by NicholasWilson Veteran of the Digi Community (969 points)
Sorry for the mistake.

I will use this model.
http://www.antenova-m2m.com/documents/download/3230dd0abe3a83a61f77c4e54ecd76e752864ffd96ca6

http://www.antenova-m2m.com/assets/documents/RADIONOVA_QG_18Nov13.pdf

Is it possible to communicate with the XBee without a microcontroller or a microprocessor as Arduino and Raspberry Pi?

I have used the XBP24BZ7 series. With high-gain antenna but with XBee Pro 868 series I have more distance without high gain antenna.

Thanks for the warning. I will use for future designs XBee 868 LP series.

Best regards
It is possible to send data straight into a zigbee without a microcontroller but you can't customise the messages or do anything with the data before you send it such as addressing it.  You would be ultimately be building a cable replacement.

Have a look here as to how you would force an XBee to force all messages to another XBee.
https://docs.digi.com/display/WirelessConnectivityKit/Basic+chat

The people who have built GPS devices like this before have used microcontrollers in their design.  Such as http://www.digi.com/blog/maker/xbee-900hp-creates-a-mesh-network-that-has-the-power-to-save-lives/
...