Home/Support/Support Forum/Xbee wifi not communication with web/local server

Xbee wifi not communication with web/local server

0 votes
hi

i configure Xbee wifi module from Xctu software
as

ATAH 2
ATCE 2
ATID SSID NAME
ATEE 2
ATIP 1
ATMA 0
ATNS 192.168.0.1
ATDL (DESTINATION IP ADDRESS)
ATC0 C03A
ATDE 50
ATGW 192.168.0.1
ATMK 255.255.255.0
ATMY 192.168.0.125

After all these setting i send time request

GET http://Destination address/app/service/time
HTTP/1.1

response on Xctu terminal:

400 Bad Request
Server: Apache-Coyote/1.1
Transfer-Encoding: chunked
Date: Wed, 16 Sep 2015 11:56:05 GMT
Connection: close

0

i try lots of option but still searching for solution

please help me solve this problem
asked Sep 16, 2015 in IEEE 802.11 (Wi-Fi) by micky2406 New to the Community (2 points)

Please log in or register to answer this question.

3 Answers

0 votes
What version of firmware are you working with? Only the latest versions support this option.
answered Sep 17, 2015 by mvut Veteran of the Digi Community (12,786 points)
thanks for reply

I am using Xbee wifi with 2026 firmware version
which is the latest version?
That is the latest version.  So your HTTP gets and sets should work. Have you checked to see if you are sending and listening on the proper port numbers? The ports on the XBee are in Hex so you do need to convert them to ASCII for most devices.
0 votes
Have you tried:
GET /pub/WWW/TheProject.html HTTP/1.1
Host: www.w3.org
answered Sep 19, 2015 by pcbbc New to the Community (18 points)
GET and POST request not working
0 votes
hi

Its work..Xbee module needs destination IP of server and there is specific format of GET and POST command.
answered Sep 29, 2015 by micky2406 New to the Community (2 points)
...