I have setup a Xbee wifi S6b as a single module on a wifi network It has associated with the access point and I can see traffic between the module and the access point. The unit can be successfully pinged from the PC (DL).
I have set the period sampling (IR) to 1000ms and would expect to at least see some data on HW Hercules setup to listen on the destination port (DE) at the destination PC (DL), but nothing. HW Hercules connects to the module OK at the set port.
AH is set to Infrastructure.
CE is STA mode.
IP is set to TCP.
What is not configured correctly or am I trying to do something that is not possible.