Home/Support/Support Forum/voltage on DIO lines

voltage on DIO lines

+1 vote
I am trying to get the DIO to work with the Xbee S1 series. I have set up one xbee with DIO1=4 (Out low) and a second xbee with DIO1=3 (input); My assumption was that with the xbee powered, I would see 0V on the DIO1 (pin19) for the DIO4=4 xbee. However, I see 3.3V on all the DIO lines. I also tried DIO=5 and still see the 3.3V. Can you explain the voltage I should measure on these DIO pins?
asked Nov 9, 2015 in RF Solutions and XBee by jekain314 New to the Community (5 points)

Please log in or register to answer this question.

1 Answer

0 votes
Try looking at http://knowledge.digi.com/articles/Knowledge_Base_Article/XBee-802-15-4-Digital-Input-Output-Line-Passing/?q=DIO+line+passing+on+XBee&l=en_US&fs=Search&pn=1.
answered Nov 9, 2015 by mvut Veteran of the Digi Community (11,302 points)
...