Home/Support/Support Forum/NK or KY make it impossible to create a PAN

NK or KY make it impossible to create a PAN

0 votes
I have been able to make a PAN with a new PAN with these settings on the Coordinator:

NK=0
KY=0
E0=1
EE=1
change ID from 0 to 1050

On the routers via USB:

KY=0
E0=1
EE=1
change ID from 0 to 1050

power off all devices, power up Coordinator, wait 10 seconds power on all Routers.

If I try to use a custom KY=1040 or if I try to use a NK=666 I cannot get the routers to join the PAN.

Is there a step by step guide as what you MUST do first to get encryption working for a custom KY or a NK values?

Thanks,
Joe
asked Dec 22, 2015 in ZigBee PRO Featureset (and legacy ZNet 2.5) by SmokinJoe New to the Community (2 points)

Please log in or register to answer this question.

1 Answer

0 votes
Yes there is. Check the Security section of the product manual for the XBee module you are using. There are examples directly in it that show how to use these settings.
answered Dec 23, 2015 by mvut Veteran of the Digi Community (11,963 points)
...