Home/Support/Support Forum/SPI problem on i.MX53 with WCE 7
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

SPI problem on i.MX53 with WCE 7

0 votes
SPI problem on i.MX53 with WCE 7

Using C# with VS2008.

Communicating with device at speed 100Kbaud, 8 bit, mode 0 and CS0.

When running in debug mode, it works perfectly.

When running the compiled program, it is not working.

Using a scope the difference is very clear
- In debug, the 8 clock pulses are correct compared to the dataline.
- In runtime, it seems like the mode changes to mode 1 (with the scope it then looks like there are 9 clock pulses)
asked Feb 23, 2016 in Windows CE by handersen New to the Community (6 points)

Please log in or register to answer this question.