Home/Support/Support Forum/Xtend RF baud rate VS Serial baud rate

Xtend RF baud rate VS Serial baud rate

0 votes
I have 9xTend modules connected to each other .

the RF baud rate is 115200 .
and Serial baud rate is 38400 .

when I connect the radio 1 to PC with software mission planner the data is receive slowly .

how I can make the serial baud rate send faster ?
what recommended baud rate for both RF and Serial ?


Regards
asked Feb 26, 2016 in XTend by jone New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
There are only two RF Date rates, 9600 and 115.2kbps. The default rate of 115.2kbps is the preferred rate for the two radios talking to each other for the shorter distances. If one needs to communicate over very long distances (over 20mi), then the slower 9600 RF data rate is recommended.

As for the Serial data rate, that rate should be set to what ever rate your devices require.
answered Feb 29, 2016 by mvut Veteran of the Digi Community (11,300 points)
...