Home/Support/Support Forum/Firewall Rule to route all HTTP and HTTPS to proxy server
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Firewall Rule to route all HTTP and HTTPS to proxy server

0 votes
After reading the Technical Note QN26:

http://ftp1.digi.com/support/documentation/QN_026_content_filtering.pdf

I set up the following rule to pass all HTTP traffic through the proxy server:

pass out break end proto tcp from any to any port=http -> to 1.2.3.4 port=3128 inspect-state

-Correct PPP Interface selected
-Is the first rule on the list


I have tested with my proxy and port (8080) and it works as intended if entered in windows internet options, but blocks all sites if entered on the Transport.Please help!

Also, can a url be used in this rule or only an IP address?
asked Mar 8, 2016 in Digi TransPort Cellular by esmith New to the Community (0 points)
edited Mar 8, 2016 by esmith

Please log in or register to answer this question.

1 Answer

0 votes
Hi

Is the proxy you using inside the network or on the internet?

as the rule changes the IP/Port and passes the traffic out of the wan interface.

you can use Hostname in firewall rules but the DNS resoluton would need to be working to resolve to the address

regards
answered Mar 10, 2016 by James.Wilson Veteran of the Digi Community (1,225 points)
Proxy is on the internet (Provided by Barracuda) It is part of their Cloud Web Filtering.DNS resolution is also working. But the above rule is not. Any Suggestions?
Any idea why it isn't working?
...