Home/Support/Support Forum/Edgeport/416 IONPORT.ini configuration
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Edgeport/416 IONPORT.ini configuration

0 votes
We need to know all possible hardware configuration and configuration options for the Edgeport/416 16-port RS232 device. That is, how to write the IONPORT.ini for ComMappingSingleDevice=1 so we cover UMP, internal 930, etc. That is, both old and new hardware configurations of this device so we can set ports 1-16 to have COM port 3-18. No matter what serial number, device hardware internally and no matter which USB port.

That is, something like, but for the Edgeport/416.

ComMappingSingleDevice =1
; Set the Serial Ports to Com5 -> Com12
; Using an EP/8 with the internal UMP ;
[EP_SINGLE-0:1] PortName =Com5
[EP_SINGLE-0:2] PortName =Com6
[EP_SINGLE-1:1] PortName =Com7
[EP_SINGLE-1:2] PortName =Com8
[EP_SINGLE-2:1] PortName =Com9
[EP_SINGLE-2:2] PortName =Com10
[EP_SINGLE-3:1] PortName =Com11
[EP_SINGLE-3:2] PortName =Com12
asked Mar 11, 2016 in USB Serial by Niels New to the Community (0 points)
edited Mar 11, 2016 by Niels

Please log in or register to answer this question.

1 Answer

0 votes
Are you asking about the DB9 version of the EP/416 or the DB25 version (regarding the serial port types)?
answered Mar 11, 2016 by jeremym Veteran of the Digi Community (1,687 points)
For the DB9.