Not able to connect to one Etherlite 160 port 1 with console cable on PC- set to 19.2K

Question

I use Putty on a PC to connect a console cable to the port one of the Etherlite 160; set connection to 19.2K.
This connection works on all other Etherlites
after pressing ### (2 times).

I need to erase the configuration of the Etherlites
because these refurbished units have an IP address
on them. I need to erase all IP info so the Etherlite will work using DHCP only on our Ethernet
network.

Answer 1

I recommend trying this KB to set the ip address:

http://knowledge.digi.com/articles/Knowledge_Base_Article/How-to-use-the-DgIpServ-utility-to-assign-an-IP-address-to-an-EtherLite-in-Windows/?q=dgipserv&l=en_US&fs=Search&pn=1