Home/Support/Support Forum/Webserver TCP port
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Webserver TCP port

0 votes
Can the TCP port for the default web server in the Digi Transport be reassigned to say port 8080?
asked Jul 25, 2016 in Digi TransPort Cellular by jserink Community Contributor (74 points)

Please log in or register to answer this question.

3 Answers

0 votes
No, but you can use the firewall to swap it over.

EG, forward requests on port 8080 to port 80 and any requests for port 80 to whatever device you want.

In your example for port 8080 the Digi is actually listening on 8080 if you have HTTP enabled.

port 8443 for https and port 8022 for SSH are listening if you enable the appropriate service. These numbers can not be changed only blocked or redirected in the firewall.
answered Jul 25, 2016 by NicholasWilson Veteran of the Digi Community (1,003 points)
0 votes
ok, I have found a work around.
I enabled the HTTPS server and turned off the HTTP server. In Connections->IP Connections the socket waiting on TCP 80 has disappeared. So this will work.

answered Jul 25, 2016 by jserink Community Contributor (74 points)

you if you want to use port 80 for port forwarding or to block it you could use the firewall to protect or forward the port

0 votes
Just to clarify, with the current Transport firmware, the TransPort listens on both ports 80 and 8080 by default. If the firmware your unit's running is "older", then it may behave differently with respect the HTTP port(s).
answered Jul 29, 2016 by jeremym Veteran of the Digi Community (1,687 points)