Home/Support/Support Forum/Cisco ASA 5505 to WR11 via ipsec
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Cisco ASA 5505 to WR11 via ipsec

0 votes
I have a Cisco A5505 with 10 VPN users at my main plant.
I have 4 WR11 unit out in the field that have verizon static IP. I can connect to the wr11 via IP adress only.
I've setup my tunnels and they will not connect from the Cisco to the WR11's.
Does anyone know if there's a trick to this or does it just not work on the ASA 5505's
asked Jul 28, 2016 in Digi TransPort Cellular by rmedwards99 New to the Community (0 points)
recategorized Jul 28, 2016 by michaelt

Please log in or register to answer this question.

2 Answers

0 votes
Hi

This should be possible.

as long as both configuration options match on both side the tunnel should come up.

if you are building to the wr11 then you can get traces from the transport to see what is not in line.

main issue is usually down to wrong subnets or wrong encryption , diffrent DH Groups

regards

James
answered Jul 29, 2016 by James.Wilson Veteran of the Digi Community (1,225 points)
0 votes
Digi offers TransPort Application Notes (AN's) and Quick Notes (QN's) within the Documentation section on the TransPort product line on the Digi support site and I believe some of them are related to this kind of setup. So I suggest looking at those, if you haven't already. They should at minimum point you in the right direction for proper configuration.
answered Jul 29, 2016 by jeremym Veteran of the Digi Community (1,673 points)
...