Home/Support/Support Forum/How to set-up Connect Core 6 SBC for WLAN access point ?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

How to set-up Connect Core 6 SBC for WLAN access point ?

0 votes
Now I try to set-up WLAN0 access-point on Connect Core 6 SBC.

I create image based on fsl-image-multimedia-full.

And add conf/local.conf

EXTRA_IMAGE_FEATURE = " ... dey-network ... "

IMAGE_INSTALL_append = " hostap "

root@ccimx6sbc:~# /etc/init.d/hostapd restart
Stopping HOSTAP Daemon: stopped /usr/sbin/hostapd (pid 1148)
hostapd.
Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
Using interface wlan0 with hwaddr 00:04:f3:ff:ff:fb and ssid "test"
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
hostapd.

root@ccimx6sbc:~# iwconfig wlan0
wlan0 IEEE 802.11abgn Mode:Master Tx-Power=17 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on

root@ccimx6sbc:~#


On Windows-PC search ssid "test", but can not connection.

I want to connect PC to CC6-SBC-server by wireless-LAN.

Run http server on CC6SBC, and PC access by web-browser.

So, Any other packages are needed ?

Please help.
asked Aug 2, 2016 in Linux by shingo New to the Community (3 points)

Please log in or register to answer this question.

1 Answer

0 votes
 
Best answer
Hello, It seems like your question is not clear?
You want to use cc6 as a AccessPoint OR CC6 as a web server?
Go through the below link, it may helpful.

http://www.digi.com/resources/documentation/digidocs/90001945-13/default.htm#reference/yocto/r_network_bridging.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CSystem%2520development%7CTechnical%2520notes%7C_____2
answered Aug 3, 2016 by cpigilam Veteran of the Digi Community (655 points)
selected Sep 7, 2016 by shingo
I want to access for CC6 by Wifi (PC or Android-Tablet).
...