Home/Support/Support Forum/ow to connect xbee wifi module to third party server

ow to connect xbee wifi module to third party server

0 votes
wifi module is in DHCP mode i want to connect to the third party server using this module

is their any suggestion how to connect the wifi module to sever? its very urgent
asked Aug 2, 2016 in IEEE 802.11 (Wi-Fi) by csreddy Seasoned Professional (194 points)

Please log in or register to answer this question.

1 Answer

0 votes
You need to query the radios DL command once it has associated with your application connected to the radio. Then you need to add that value to your data payload.
answered Aug 2, 2016 by mvut Veteran of the Digi Community (11,441 points)
if one module i can able to query. if no.of is more than 10 that time its difficult to send the query to each module.

with out sending as query from server is any other way to connect xbee wifi module with server
No, there is no other way.
thank you very much
Try sending a Remote T command using the XBee's IP services as a Broadcast (Chapter 4 of the manual). Only XBee modules should respond to it using an API frame that will include the modules IP address.
k, but without any query from the server i can able to communicate with tcp server by sending the one dummy packet to my server from xbee
Yes you could send one file with the radios IP in it from the radio to the server.
...