Home/Support/Support Forum/Arduino Web Server controlling Xbee network

Arduino Web Server controlling Xbee network

0 votes
I bought for this project:

5 Xbee's S2C,
4 Xbee nanoshield
4 Arduinos Nano
1 Arduino MEga 2560
1 Xbee shield for 2560
1 W5500 Ethernet Shield

I will have a page hosted in Arduino 2560.
This page will have 4 buttons, this buttons pressed will send data to arduino nanos via Xbee 802.15.4 network.
Its a simple project to control led 13 in arduino nano.
The Arduinos nanos will have to turn on led 13 and tell arduino mega the led 13 is on/off to switch button color green/red

Can anyone help me start or give me good advices?
asked Aug 4, 2016 in IEEE 802.15.4 by wkpedro New to the Community (1 point)
edited Aug 3, 2016 by wkpedro

Please log in or register to answer this question.

1 Answer

0 votes
You have posted this to the wrong forum. You want to post this on an Arduino forum and not an XBee forum. All the XBee does in this case is act as the cable between the devices.
answered Aug 4, 2016 by mvut Veteran of the Digi Community (13,094 points)
ok thanks, i already did same post there, hope i can get help
"All the XBee does in this case is act as the cable between the devices."
comming from a veteran member, this help! thanks :)
...