I'm unable to connect to the Digi Connect SP device.
I own two out of the box devices which I conntected to power and network and assigned an IP address by using DHCP.
The divices consumes the IP address and do respond to ping.
But none of the following options to connect to it do work:
- Digi Device Discovery (no device found)
- HTTP (no response)
- SNMP (no response)
- Telnet/SSH (no response)
There is no firewall running between device and pc. Both are connected to the same network switch.
Digi Device Discovery lists any other Digi devices running in the network, but the 2 Digi Connect SP.
Due to the lack of a DTE device I'm unable to connect through serial port.
What do I have to do to connect to the device?