Home/Support/Support Forum/Update XBee firmware through MCU

Update XBee firmware through MCU

+1 vote
How do I update the firmware of the XBee modules through an external MCU? They are connected through UART.

The XCTU software seems to hide the exact sequence behind a spiffy gui. I believe there is an accessible bootloader through which the XBee firmware is updated. What I can't seem to confirm is how to connect to it. i.e. The sequence of pin toggling and/or data transmissions.

I have several XBee modules connected to a MCU on a board inside a device and they're scattered throughout the country. It would not be feasible to access/retrieve, open, and solder a connection header on each device in order to program each XBee module one by one. However, I can remotely update the MCU firmware. So I'm looking to update the XBee firmware by first loading a special-purpose firmware to the MCU.
asked Oct 19, 2016 in XCTU by NormanH New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

–1 vote
answered Oct 20, 2016 by exile Community Contributor (92 points)
edited Oct 18, 2018 by exile
...