Sending GPS data to more than two connected IP devices (WR44)

Question

I'd like to send GPS data from the Digi Transport WR44 to three other IP devices. In the in web interface under configuration - position >GPS, there are only two fields available. They are IP connection-1 and IP connection-2. Is it possible to broadcast the GPS data to more than 2 connected IP devices?

Answer 1

I suspect you are using software that is over 3 years old. Digi upgraded the firmware (version 5212) and included the enhancement:
The number of IP hosts that GPS data can be forwarded to has been increased from 2 to 8.

Check your firmware version and consider upgrading to the latest firmware.

Comments

Thank you! The version upgrade was all that was needed.