Just bought a new Xbee Zigbee module, but the firmware is totally different
Here is the reference I bought:XB24CZ7SIT-004
When connected via XCTU I see: XB24C TH Reg and I have no choice to change the firmware. My other modules were showing XB24-ZB (P/N XB24-Z7CIT-004)
For the previous Xbee, I was used to load the firmware to be either Coordinator or Routeur and then AT or API.
What should I do
Did not find any documentation as all what I have is referring to the previous setup.
What should I do ?