I am using 2 xbee S2C modules for my project, one is connected to PC via USB, and other is remote.
When testing two modules between PC to PC by connecting both modules to two PCs, the communication works fine.
But, when one module with PC and other given power through adaptor, the loopback test is not working.
power and Assoc LED are glowing in both modules,
when sending data from PC, RSSI Led in both modules (PC and remote) glows, TX lED glows in PC module, while both RX and TX modules were off in the remote xbee
but when I try to remove the jumper (loopback) between DIN and DOUT, the RX LED glows in the remote..
I dont know how to solve this remote xbee to make transmit the data back.
Thanks in advance