Home/Support/Support Forum/Are there any ccimx6ulsbc dip switch or jumper settings required before attempting the microSD recovery method?
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Are there any ccimx6ulsbc dip switch or jumper settings required before attempting the microSD recovery method?

0 votes
My bricked unit is still spitting jibberish out the console serial port regardless of the method attempted.
related to an answer for: Recover bricked ccimx6ulsbc
asked Mar 14, 2017 in Linux by cgamboni New to the Community (8 points)

Please log in or register to answer this question.

1 Answer

0 votes
I'm afraid you can't boot SBC from uSD because internal emmmc flash is used. Per:
https://www.digi.com/resources/documentation/Digidocs/90001531/#reference/6ul_sbc/r_boot_mode.htm?Highlight=j10
By default, the ConnectCore 6UL module boots from the internal board settings, allowing it to boot from internal NAND memory. However, it is possible to boot from USB through.

So recovery in case of cc6ulsbc is done via USB:
https://www.digi.com/resources/documentation/digidocs/90001515/default.htm#task/yocto/t_faq_recover_device_yocto.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CFAQ%7C_____1

Why do you want to boot from uSD?
answered Mar 15, 2017 by LeonidM Veteran of the Digi Community (3,203 points)
...