I am using an XBee S68 WiFi Adapter plugged into my embedded controller board. I am going to be sending UDP packets to the S68 from a Windows-based PC. I am configuring the S68 module with Digi XBIB-U-DEV RevD board connected to my Windows 10 computer via a USB connection.
The Zigbee module is configuring just fine using the latest version of the XCTU program (I can set the port number, the Access Point SSID and WPA2 password etc). I am bewildered though as how to set the S68 Adapter's DNS name so that my Windows-based PC client program (which uses Winsock2) can connect to the S68 by its "friendly" DNS name rather than the DHCP generated IP address (which of course can be changed by the access point).
Can someone tell me how to configure the DNS friendly name of my S68 module? Thanks!