I have a connectport X2 ZB (Int'l - part # 50001687-05) i have not used for a while and was looking to update the firmware...
Current firmware status is
Model: ConnectPort X2
Firmware: 2.14.0.3 (Version 82001596_J 06/24/2011)
POST: 1.1.3 (release_82002307_D)
Looking at the following page (https://www.digi.com/support/productdetail?pid=3567&type=firmware), I just want to be sure I am not going to do something stupid, so prefered to ask questions first...
- second link in the firmware section seems to indicate I have the latest POST firmware, correct? (so I should be ok with regards to the warning/note from 1st link...)
- Now where I get confused is for the EOS firmware...
- first there is a link to release notes for ver 2.17.0.5 then a link to Ethernet Python EOS firmware ver. 2.17.0.21
- then there is a link to Ethernet Direct Access EOS firmware ver. 2.14.0.7 as well as release notes
ConnectPort X2 Ethernet Direct Access EOS firmware ver. 2.14.0.7
I am not sure which one I should go for.... any clues please? (I assume that the Important Note about 2.9.0.x EOS firmware is not relevant to me...)
Thanks in advance for your help