Home/Support/Support Forum/Voltage regulator IC for 4G XBee?

Voltage regulator IC for 4G XBee?

0 votes
What 3.3V (stepping down from 12V) voltage regulator IC provides clean enough power for the XBee? I am using the 4G LTE Cat1 XBee, which has a stated max current on transmit of a little over 1A, so I am thinking the regulator should be rated for 1.5A. There are lots of them out there, but which ones are known to work well with the XBee? Thank you.
asked Jun 23, 2017 in XBee Cellular by librarytech830 New to the Community (3 points)

Please log in or register to answer this question.

3 Answers

0 votes
Digi does not have a list of recommenced components. Generally you want to use one that exceeds the Min value needed and then add the additional filtration to keep the ripple as low as possible.
answered Jun 23, 2017 by mvut Veteran of the Digi Community (12,777 points)
0 votes
There are some power supply guidelines in the user guide that will be helpful when you are choosing a step-down regulator: https://www.digi.com/resources/documentation/digidocs/90001525/#reference/r_cell_power_supply.htm%3FTocPath%3DDesign%2520recommendations%7C_____1.
answered Jun 29, 2017 by sminch New to the Community (1 point)
0 votes
Thanks for the replies. I ended up using a MIC29150 with a 22 uF aluminum capacitor on the output, and it seems to work. I also ended up feeding the regulator 5V instead of 12V to decrease heat issues. With 0.5 ohms in front of the regulator to share the power dissipation, I calculate only about 1.6W being dissipated in the regulator. It gets warm to the touch but not terribly so. I got a lot of helpful information from Micrel Application Note 9.
answered Jun 30, 2017 by librarytech830 New to the Community (3 points)