Home/Support/Support Forum/How Xbee Pro S2C transmit data packets bidirectional(From A to B and B to A) in API Mode?

How Xbee Pro S2C transmit data packets bidirectional(From A to B and B to A) in API Mode?

0 votes
I configured xbee pro s2c-A as router and xbee-B as a coordinator but in API mode the only router can transfer packets to coordinator but coordinator transmit data packets to self what is the problem?
asked Jul 27, 2017 in DigiMesh Proprietary Mesh Networking by Aviral New to the Community (1 point)

Please log in or register to answer this question.

2 Answers

0 votes
Check the 64 bit address you are using in your API TX request frame. From the Router to the Coordinator it can be either the SH and SL of the coordinator or the address 0. From the Coordinator out, it needs to be either the broadcast address of 0xFFFF or the destination nodes SL and SH values.
answered Jul 27, 2017 by mvut Veteran of the Digi Community (15,223 points)
0 votes
Are you using DigiMesh xbees modules, right? If you really are, DigiMesh doesn't work with the idea of coordenator/router/enddevice, they're all digimeshs, so they work at the same level.
take a look at this link:
https://www.digi.com/blog/networking/what-are-the-differences-between-digimesh-and-zigbee-mesh/
see if it helps.

cheers
answered Sep 1, 2017 by paiusco New to the Community (5 points)
...