Hi to everyone, as by object I'm using xbee zigbee s2c modules to run a network, so I have a coordinator and several routers. Using a microcontroller I need to read the xbee pin D5 to know if it is connected to the network or not. Until recently I worked with xbee s2b modules and everything worked properly, with the new modules the associated led function on D5 pin does not work the same way. In practice, when all the devices are turned on (coordinator and router) the D5 pin blinks correctly, if I then spend the coordinator, after a while I have configured it, the router pin D5 stops blinking as expected, but after a few seconds restarts flashing with the coordinator off. How is this possible?
Strange, routers, even without a coordinator, can communicate perfectly ...
All this with s2b devices did not happen and in the dataset of the new s2c hardware there is no difference in operation with s2b.
How can I solve this problem?
Thank you, Francesco