A while ago I have linked XBee 2SC modules installed on the dev kit boards.
Today I went back to basics and followed the IconXBee/XBee-PRO S2C DigiMesh 2.4 Getting Started Guide
this included resetting to factory defaults. The modules linked and could discover each other.
Although they appeared to work I could not type in the console and get them to send/receive text.
I started to edit the parameters but then for reasons unknown, I was blocked from editing. I got the popup screen saying to reset the boards, but that didn't work.
The associate LED is flashing on two boards. The on-sleep LED is glowing on both boards.
I switched to a different PC, one that I have previously used to connect to the dev boards. All three modules failed to be detected. It is as if the 3 modules have died.
I checked the USB voltage on the PC. It is exactly 5VDC.
I don't want to plug in any more modules until I find out what has happened to the 3 unresponsive ones.