Home/Support/Support Forum/Program the firmware for 6UL
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Program the firmware for 6UL

0 votes
After I install the firmware into the NAND and rebooting the device I have got the message: "ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree". I have tried erase the flash memory by command "erase" and reinstall the firmware - the same result. My device is DIGI iMX6UL W164902075153. Firmware 8200400_A from P.1 https://www.digi.com/resources/documentation/digidocs/90001514/#task/yocto/t_program_firmware_yocto.htm%3FTocPath%3DDigi%2520Embedded%2520Yocto%7CGet%2520started%7C_____3. Thanks!
asked Oct 9, 2017 in Linux by vasilyvs New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
You have SBC PRO, you are using firmware for SBC express.
Your firmware is here:
https://www.digi.com/resources/documentation/digidocs/90001547/#task/yocto/t_program_firmware_yocto.htm
Also your documentation is there too.
answered Oct 10, 2017 by LeonidM Veteran of the Digi Community (4,445 points)
...