Home/Support/Support Forum/LCD on programmable xbee (zigbee)

LCD on programmable xbee (zigbee)

0 votes
Hello,

Is it possible to operate a little display with the programmable xbee zigbee(S2C)?
For example something like this:
https://www.adafruit.com/product/3502

Additional question:
Is there a programmable version available or planned for the Xbee zigbee S2D?

Thanks & BR,
Simon
asked Nov 3, 2017 in XBee Programmable Development by simonk New to the Community (1 point)

Please log in or register to answer this question.

1 Answer

+1 vote
You will need to check with Adafruit what kind of interface it uses. If it is a UART and 3V CMOS level, it would work.

As for your S2D question, you will need to check with Digi Sales.
answered Nov 3, 2017 by mvut Veteran of the Digi Community (12,302 points)
Thank you for your answer. It seems to support 3v  logic levels.
I have checked on their site; it is SPI, not UART
Looks like the S2C Programmable does support SPI Master mode if you configure it properly. So it should work.
...