How to connect Tradfri Bulb with ZigBee

Hello Community!

I tried about 6 hours to find the IKEA Tradfri Bulb on my ZigBee Network.

What do I wrong or what can I do to find the Bulb? I changed the Channels with XCTU and hoped to find the Bulb with the "Discover radio nodes in the same network"-Function in an other network channel, but it didn't help.

I used the Wireless Connectivity Kit from Digi with 2 S2C XBee Modules + UART-Board and the XCTU Software from Digi.

Best Regards,
Aredon

asked Jan 25, 2018 in XCTU by Aredon New to the Community (3 points)

Please log in or register to answer this question.

1 Answer

Best answer

The Bulb in question is using a Light Link Profile which means you need to go to zigbee.org to find out more about that profile. You will then need to adjust the XBee modules settings to match the Profiles requirements.

answered Jan 25, 2018 by mvut Veteran of the Digi Community (15,223 points)
selected Jan 25, 2018 by Aredon

And were you able to pair the Tradfri bulb with your xbee device ? I keep getting issues with sleep cycles.

commented Feb 5, 2018 by ydbondt New to the Community (0 points)

I do not have that device. But I did do some searching and found what profile it uses. You will also most likely need to contact the manufacture of that device to find out what the sleep settings are.

commented Feb 5, 2018 by mvut Veteran of the Digi Community (15,223 points)

How to connect Tradfri Bulb with ZigBee

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Please log in or register to add a comment.