I want to realize a network using several "Connect Port X4H", using them as "Router", for
the management of end points, such as "XBEE Digi Sensors adapter L/H/T".
They must comunicate with a central "coordinator", realized by a Raspberry Pi2 with
mounted on a "RaspBee premium" Zigbee manager.
My questions are:
- Is it possible obtaining the firmware as ROUTER for the "Connect Port X4H Nema 4X/IP66
- And also, is it possible to find the firmware as COORDINATOR for the "RaspBee" module?
I need a firmware with extension ".zigbee", in order to automatically find the "Connect
Port X4H" and the "XBEE Digi Sensors nodes", by using the "deConz" software?
Actually on our Digi-based system the Connect Port X4H Nema 4X/IP66 Rated control panel show me that the loaded firmwares are:
Gateway Firmware: 0x21a0
Firmware: 126.96.36.199 (Version 82001536_K2 03/08/2012)
Sensor Node Firmware Version: 0x2ca7
You can find the above mentioned component/software in the following:
-Connect Port X4H Nema 4X/IP66 Rated:
-XBEE Digi Sensors adapter L/H/T:http://docs-europe.electrocomponents.com/webdocs/1147/0900766b8114779c.pdf
I hope you can help me and I thank you all,