Home/Support/Support Forum/Xbee S2C 802.15.4 SM=1 Sleep_RQ not working

Xbee S2C 802.15.4 SM=1 Sleep_RQ not working

0 votes
I already use the Xbee 802.15.4 S1 with the SM=1 and Sleep_RQ pin. Everything works well, when I put 3.3V on pin 9, the device goes to sleep and consume minimum current.
I put the same configuration in the Xbee 802.15.4 S2C and when I apply 3.3V on pin 9 (TH) the device still consumes 30mA.
There is more information about the firmware: Product family: XB24C Function set 802.15.4 TH, Firmware version: 2001
To test it, I only put 3.3V on pin 1 VCC, gnd on pin 10 and 3.3V on pin 9.
asked Mar 14, 2018 in IEEE 802.15.4 by viaj2901 New to the Community (0 points)

Please log in or register to answer this question.