Home/Support/Support Forum/Getting XBEE S2C End Device Address through USART by PIC MCU
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Getting XBEE S2C End Device Address through USART by PIC MCU

0 votes
Hello,
Recently, I started using XBEE S2C modules in my project. I would like to get XBEE Device Address by sending commands to the XBEE module through USART. But, the XBEE Device doesn't return any information. I used the API1 mode to connect with XBEE module. The Baud Rate is 9600 bps. The commands I use to get XBEE Device Address are described as below.

const uint8_t XBEE_ADDRESS_MAC_UPPER_4BYTE [] = {0x7E, 0x00, 0x04, 0x08, 0x52, 0x53, 0x48, 0x0A};
const uint8_t XBEE_ADDRESS_MAC_LOWER_4BYTE [] = {0x7E, 0x00, 0x04, 0x08, 0x52, 0x53, 0x4C, 0x06};

Could you please tell me how to do it correctly ?

Thanks.
asked Mar 30, 2018 in Realport by phonezawthein New to the Community (0 points)

Please log in or register to answer this question.

...