Home/Support/Support Forum/Can't boot either of the methods
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Can't boot either of the methods

0 votes
Hello

Hope someone can be of assistance.

I've received a demo board to test out-ConnectCore6 IMX6 WiFi Bluetooth.

I'm supplying it with 5 VDC and 1A. Power light is on.

Nothing appears on screen-I've been told it has a demo on there already.

So I assume this is not the case.

I've tried booting via SATA to no avail.

Same goes for SD-Card.

To just further expand on my current knowledge. I code firmware for various dev boards. The Pi,Rock 64, Pine 64 and others.

So my way of thinking is dev board way

Any advice will be appreciated
asked Jul 2, 2018 in Linux by Henning28 New to the Community (0 points)

Please log in or register to answer this question.

1 Answer

0 votes
Do you have serial console connected to the board?
Do you see any activity on serial console when you power up?
Please follow this:
https://www.digi.com/resources/documentation/digidocs/90002284/#task/yocto/t_set_up_hardware_yocto.htm
and make sure all cables and switches are connected properly.
answered Jul 5, 2018 by LeonidM Veteran of the Digi Community (3,519 points)
...