Home/Support/Support Forum/Need some details about Tamper-detection
Welcome to Digi Forum, where you can ask questions and receive answers from other members of the community.

Need some details about Tamper-detection

0 votes
Hi,

Based on this documentation page:
https://www.digi.com/resources/documentation/digidocs/90001548/#concept/trustfence/c_tamper_detection.htm

I couldn't find all responses to my questions.

Talking about opening the enclosure, is it the SOM enclosure or something else ?

The existing digital and analog interfaces use MCA pins. Does it mean that the tamper events detector pins are already connected to the encoluse of the SOM ?
Or need physically to connect them to the enclosure we want to protect ?

Any details about the Tamper-detection is welcome.

Thanks in advance for your answer.

Regards.

YC
asked Aug 22, 2018 in Linux by YounesC New to the Community (21 points)

Please log in or register to answer this question.

1 Answer

+1 vote
 
Best answer
>Talking about opening the enclosure, is it the SOM enclosure or something else ?

No, your enclosure - the enclosure you will put your product in. if you have this feature enabled and GPIO assigned to it, then the system will get notified if the enclosure is or was open via GPIO/interrupt

>The existing digital and analog interfaces use MCA pins. Does it mean that the tamper events detector pins are already connected to the encoluse of the SOM ?
See above - some does not have any enclosure. You build your product, create an enclosure and connect pins to it.

>Or need physically to connect them to the enclosure we want to protect ?
exactly!
answered Aug 23, 2018 by LeonidM Veteran of the Digi Community (3,654 points)
selected Aug 24, 2018 by YounesC
...