I try to read analog dato from my xbee but i allways get 1023 as a result on every pin ADC i can try (AD1, AD2 or AD3...)
The Xbee connected to my temp sensor is on "End Device" mode.
DIO1 , 2 , 3 and 4 are set to ADC mode.
On my Coordinator Xbee all i get are the same value :
ADC1 : 1023
ADC2 : 1023
ADC3 : 1023
ADC4 : 1023
Even if nothing is connected to those pins...
What's wrong ?