Home/Support/Support Forum/Python code for ConnectPort X2 for redirecting data stream from Xbee to the DeviceCloud (Remote Manager)

Python code for ConnectPort X2 for redirecting data stream from Xbee to the DeviceCloud (Remote Manager)

0 votes
This is part of a document called "A Beginner’s guide to send data to Device Cloud from a ZigBee Network"

file:///C:/Users/mgolzar/Documents/New%20Temp%20Sensor%20Information/Gateway/guide_to_transmit_data_to_Device_Cloud.pdf


6 Running python script on gateway
You need a python script running on ConnectPort gateway that redirects all incoming
data from XBee module(s) to Device Cloud it is connected to.
A python file for this purpose is available at below provided link:
http://www.digi.com/wiki/developer/index.php/XBee_to_Device_Cloud_-
_DataPoint_Creation
This script encodes data in Base64 format to add security for uploaded information.
Add that script onto ConnectPort gateway and enable auto-start.
To do so, open Web UI of ConnectPort gateway and navigate to Applications->Python.
Upload above script to gateway by following steps.
Click on Choose File and point to the respective python script and click upload



but when I go to the suggested link there is no such python script.
can anyone help me with that?
Thanks
asked Mar 1 in XBee3 by mgmmath New to the Community (0 points)

Please log in or register to answer this question.

...